The New EU Detergent Regulation (EU)2026/405 Has Officially Taken Effect And Will Be Fully Enforced In September 2029

Basic Information：

Conventional AES thickens into a gel at 10°C and solidifies substantially at 0°C. Low-temperature AES has a lowered freezing point and maintains good fluidity even at 0°C, with solidification occurring mainly at −5°C, making it more suitable for use in cold weather than conventional AES.

Basic Information：

     Conventional AES exhibits good foaming performance, but produces relatively large, loose foam that lacks denseness.Foam-enhanced AES, improved on the basis of conventional AES, delivers richer and denser foam.

Basic Information：

White or pale yellow powder/granules; in liquid form, it appears as a transparent viscous liquid or milky white paste. It delivers strong detergency and performs well against particulate soils, oil grease soils and protein soils, with detergency improving at higher temperatures. It produces abundant, fast forming foam yet exhibits average foam stability. It has poor hard water tolerance; precipitates will form in the presence of calcium and magnesium ions, reducing detergency. Chelating agents such as EDTA or sodium citrate should be added in formulations. It features high degreasing power and relatively high skin irritation。

Basic Information：

Alias: AOS. Yellow transparent liquid or white to pale yellow granules. Very soluble in water, but tends to form a viscous gel when concentration exceeds 40%. Mild to skin, has good compatibility with enzymes, acid-resistant, alkali-resistant, and insensitive to hard water. Water hardness and electrolytes have little effect on foaming power.

Basic Information：

Alias: SLS/SDS/K12, Sodium Dodecyl Sulfate, Foaming Powder.White powder or needle-like crystals with a slight fatty odor.Soluble in water to form a translucent solution.Stable to alkalis, weak acids and hard water, with good compatibility with anionic and nonionic surfactants.Flammable, decomposes at high temperatures (>120°C).

Basic Information：

Compared with conventional AES, thickening-type AES has a lower viscosity and better fluidity.In addition, this product broadens the salt thickening range and is less prone to thinning back in salt-thickened systems.

Basic Information： 

CAB is an amphoteric surfactant, appearing as a colorless to pale yellow transparent liquid with a slight fatty amide odor. It has low irritation.

 Performance：

It has solubilizing properties, which benefit the low-temperature stability of detergent products, and provides thickening, foaming, foam-stabilizing, antistatic and softening properties.